or crystal for the XV144. I had the same problem months back, and
>Hello All
>
> I use a K2 and have XV50 and 144. The XV50 seems to be working just
>fine. However the 144 seems to have a problem. I live far enough away
>from other operators and had a poor enough antenna that I've not been
>able to find a test horse to talk to on two ssb or cw. finally made
>that happen last week. What I found was that the transverter seemed to
>be working. Receive performance is not as good as I think it should be
>(I changed out the loop antenna for an eleven element beam fix pointed
>at the metro area about 100 miles away). I need to run with the preamp
>on, rf and af gains all the way up to hear BIG stations at 100 miles in
>good conditions. And even more worrying is that, based on several
>stations reports my dial reads 12.4 khz high.
>
> From what I can see in the manual there is no alignment for frequency
>readout as such and the adjustment available from the TRN menu is only
>10 khz.
>
> In checking the K2 against WWV it seems to be within well less than
>100 hz.
>
> Suggestions?
>
>TNX
>de
>David
>
>
>-----
>No virus found in this message.
>Checked by AVG - www.avg.com
>Version: 10.0.1392 / Virus Database: 1520/3862 - Release Date: 08/27/11
>
>______________________________________________________________
>Elecraft mailing list
>Home:
http://mailman.qth.net/mailman/listinfo/elecraft>Help:
http://mailman.qth.net/mmfaq.htm>Post: mailto:
[hidden email]
>
>This list hosted by:
http://www.qsl.net>Please help support this email list:
http://www.qsl.net/donate.html