Re: using P3 and Skimmer
Posted by
Don Wilhelm-4 on
Aug 28, 2011; 11:41pm
URL: http://elecraft.85.s1.nabble.com/using-P3-and-Skimmer-tp6735739p6735948.html
Doug,
The setup with CW Skimmer is about the same as for LP-Pan. CW Skimmer
is only the software, and it needs a baseband signal having I/Q outputs
to operate. Such a signal can be obtained from LP-Pan, or a Softrock
receiver, or a variety of other SDR devices that provide I/Q signals to
the soundcard inputs.
I also note that there is a slight inconsistency between those "bulleted
features" and the P3 manual.
The manual states that its INPUT should come from a buffered IF output
on the transceiver, however the P3 OUT signal comes from a 3 dB splitter
- it apparently is not separately buffered in the P3.
73,
Don W3FPR
On 8/28/2011 5:51 PM, DOUGLAS ZWIEBEL wrote:
> Buffered IF output to drive other equipment (CW Skimmer etc.)
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html