Re: W2 Advice!

Posted by Guy, K2AV on
URL: http://elecraft.85.s1.nabble.com/W2-Advice-tp6739249p6739593.html

The web page indicates two sensors for HF/6:

0.1-200 W & 1-2000 W sensors for 1-54 MHz

It sounds like your KPA500 is hooked up to a 200W sensor.

73, Guy.

On Mon, Aug 29, 2011 at 3:50 PM, Phil LaMarche <[hidden email]> wrote:

> With the W2 on the output side of the KPA500, in the 2KW range, it pins the
> bar graph at 500 watts? Did I miss something in the manual?
>
>
>
> Phil
>
>
>
> Philip LaMarche
>
>
>
> LaMarche Enterprises, Inc
>
>
>
>  <mailto:[hidden email]> [hidden email]
>
>  <http://www.lamarcheenterprises.com/> www.LaMarcheEnterprises.com
>
>
>
> 727-944-3226
>
> 727-937-8834 Fax
>
> 727-510-5038 Cell
>
>  <http://www.w9dvm.com/> www.w9dvm.com
>
> K3 # 1605
>
> KPA500 # 029
>
> P3 #1480
>
>
>
>  CCA 98-00827
>
> CRA 1701
>
> W9DVM
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html