Re: New KPA500 1.11 f/w Released

Posted by Cady, Fred on Sep 01, 2011; 8:04pm
URL: http://elecraft.85.s1.nabble.com/New-KPA500-1-11-f-w-Released-tp6750941p6751432.html

Hi Eric et. al.,
I wonder if it would be possible to have the INHIBIT# enable/disable be
on a per-band basis for the KPA500. That way one could use DIGOUT1 to
disable the amp on a band, say 17m or some band where the antenna SWR is
too high, and to allow it to be enabled on 6m when DIGOUT1 is used to
turn on the PR6. One downside of this that I can see is that if DIGOUT1
is used to disable the amp on 17m it would also turn on the PR6 so a
receive antenna wouldn't be able to be used on that band.

73,
Fred
 

Fred Cady
fcady at ieee dot org
"The Elecraft K3: Design, Configuration, and Operation"
www.ke7x.com

> -----Original Message-----
> From: [hidden email] [mailto:elecraft-
> [hidden email]] On Behalf Of Eric Swartz WA6HHQ - Elecraft
> Sent: Thursday, September 01, 2011 11:45 AM
> To: [hidden email]
> Subject: [Elecraft] New KPA500 1.11 f/w Released
>
> We have just posted new V1.11 firmware for the KPA500 to the web. See:
> http://www.elecraft.com/KPA500/kpa500_software.htm
>
> 73,
> Eric
>
> www.elecraft.com
> _..._
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html