Re: K3s and P3s Can't Swim
Posted by
Alexey Kats on
Sep 15, 2011; 1:37am
URL: http://elecraft.85.s1.nabble.com/K3s-and-P3s-Can-t-Swim-tp6795158p6795184.html
Lee,
Out of sheer curiosity, did you mean 150 degrees Celsius or Fahrenheit? (For
the record - 150 F is approximately 65 C, quite normal for electronics. On
the other hand, 150 C is approximately 300 F - a little bit too high, I am
afraid. Not too high to cause the solder to melt, but still too high,
especially to things like TFT monitors or LCD displays.)
On Wed, Sep 14, 2011 at 6:24 PM, Lee Buller <
[hidden email]> wrote:
>
> Well, get the insurance for sure.....
>
> But, I've seen electronics cleaned out with a hose with clean water. Then
> I've
> seen them dried with a hair dryer....or baked slowly in an over at 150
> degrees..... Then....the worked.
>
> Lee
> K0WA
>
--
Alexey Kats (neko)
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html