Re: P3 - Wandering Baseline
Posted by
k6dgw on
Sep 23, 2011; 6:40pm
URL: http://elecraft.85.s1.nabble.com/P3-Wandering-Baseline-tp6822403p6825269.html
On 9/22/2011 6:28 PM, Don Wilhelm wrote:
> Fred.
>
> Check the coax between the K3 and the P3. I think you will find the
> problem solution there.
I've tried three different jumpers [the one that came with the P3, and
two others I'm very sure are good], with no change. Most of the time,
the P3 works just great. I'm pretty certain the case screws/2-D
thingy's are grounded, I took the pieces off and they all show
continuity and no paint.
Before cluttering up the list anymore, I'll try to figure out the P3
Utility and see if I can get a screen capture. It may take a bit of
time since this anomaly occurs only infrequently.
73,
Fred K6DGW
- Northern California Contest Club
- CU in the 2011 Cal QSO Party 1-2 Oct 2011
- www.cqp.org
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html