Re: Voltages for Q5 and U8?

Posted by Byron Servies on
URL: http://elecraft.85.s1.nabble.com/Voltages-for-Q5-and-U8-tp6825928p6829686.html

Hi Mike,

I remember you saying you had taken out the KAT1 for these tests.  Did
you re-install the RF-DET jumper on J2 after you did that? That is an
error I have made myself, and I'm afraid it is my only suggestion.

On Sun, Sep 25, 2011 at 10:36 AM, K7MH <[hidden email]> wrote:

> I do not get a reading on pin 6 of P1 on the filter board which should be
> the premix signal output.
>
> Any suggestions would be much appreciated.
> I will double check some things.

--
73, Byron N6NUL
----
- Northern California Contest Club
- CU in the 2011 Cal QSO Party 1-2 Oct 2011
- www.cqp.org
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html