Re: Voltages for Q5 and U8?

Posted by K7MH on
URL: http://elecraft.85.s1.nabble.com/Voltages-for-Q5-and-U8-tp6825928p6842806.html

I got it working and finished the K1 this evening. Thanks for all the assistance and suggestions.
I am not certain where the problem was but I re-soldered and touched up a few solder joints on the filter board. I think it may have been C10 as the coating on the cap was down into the via a little ways. After touching it and some other joints, I re-peaked the filters in receive and found that the 2nd premix filter of each band peaked in a different place. In transmit it came alive.
Very cool!!
Thanks again, Mike K7MH.