Posted by
Nr4c on
Oct 25, 2011; 1:47pm
URL: http://elecraft.85.s1.nabble.com/P3-Can-the-Panadapter-be-used-with-a-Ten-Tec-Orion-1-tp6923766p6928860.html
Pardon me, but I have read a lot of the traffic on this topic, and some
very good ideas have been considered. Recorded audio into the mic jack
or a sound source as in a 'pink' noise, or ''white' noise allows the
radio to be adjusted. I have a K3, so I can use it with the P3 to
analyze the audio of my other radio(s) while transmitting into a 'dummy'
load.
But, none of these account for the difference in mics. A station with
a dozen radios and a dozen mic is still going to show differences in
transmitted audio due to different mics and mic usage/voices.
I'm glad I don't have to do this!
...bill nr4c
On Tue, 25 Oct 2011 13:09:47 +0000, Dave Johnson wrote:
> Lu, if you have access to an SDR receiver that can record it's output
> on a PC, it might be easier that using a noise source.
>
> When comparing several microphones and headsets on my K3, I used a
> Perseus SDR to play back the results for A/B/C/D comparison in order
> to pick the best equaliser/mic combination. The saved files from the
> Perseus were labelled to match the microphone and can be played back
> very easily, in addition, recording a wide chunk of frequency means
> the bandwidth can easily be checked if that might be an issue.
>
> 73 Dave
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html