... Joe, W4TV
> What about the freq display? The red cursor is correct but the actual
> numeric freq display is double the delta.
>
> Joe K2UF
>
> No trees were harmed in the sending of this e-mail; however, many electrons
> were inconvenienced.
>
>
> -----Original Message-----
> From:
[hidden email]
> [mailto:
[hidden email]] On Behalf Of Rick Prather
> Sent: Monday, October 31, 2011 5:36 PM
> Cc: Elecraft Reflector
> Subject: Re: [Elecraft] P3 - Know bug?
>
> Not here!
>
> With the P3 set to 10 khz span and the main cursor on 4 when I tune either
> the RIT or XIT 1 khz the cursor is on 3 or 5 exactly.
>
> Rick
> K6LE
>
> On 10/31/2011, at 10:50 , David Pratt wrote:
>
>> I am getting a 'feature' with my P3 when using RIT. I find that the RIT
>> frequency deviation displayed on the P3 is twice that of the RIT
>> deviation displayed on the K3. As far as I am aware I have the latest
>> firmware installed on both my K3 and my P3. Is this a know bug or do I
>> have a fault in my K3/P3 installation?
>>
>> Sorry if I have missed it if it has been discussed on here before.
>>
>> 73 de David G4DMP
>>
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>