Re: K3 together with P3 and EXPERT 1k possible?

Posted by on Nov 28, 2011; 1:26pm
URL: http://elecraft.85.s1.nabble.com/KX3-Availability-tp7037556p7038682.html

This is the way I have my K3/P3 combination connected to the 1k-FA, and it
works well.

Stewart G3RXQ
On Mon, 28 Nov 2011 07:00:26 -0600, Phil & Debbie Salas wrote:

> The SPE Expert has the standard BCD band data interface as well.  You can
> just feed the band data outputs of the K3 to the SPE Expert and not even use
> the RS232 interface.
>
> Phil - AD5X
>
> "Good morning all.  I have seen some postings of EXPERT 1k users here on the
> reflector, I need
> your help.  A friend has a K3 and a P3. Now he wants to connect his EXPERT
> PA to this
> combo. The problem: The K3 RS232 is occupied by the cable to P3, both P3
> RS232 are occupied by Cables to k3 and PC. Because he wants to use the
> Expert with different Antennas on different bands, he wants the K3 to tell
> the EXPERT on which band it should work. But how? I personally have a
> K3/P3/KPA500, so I can´t try to find a solution.  Peter, DL2FI"
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html