> -----Ursprüngliche Nachricht-----
> Von:
[hidden email] [mailto:elecraft-
>
[hidden email]] Im Auftrag von Stewart
> Gesendet: Montag, 28. November 2011 14:27
> An: Phil & Debbie Salas;
[hidden email]
> Betreff: Re: [Elecraft] K3 together with P3 and EXPERT 1k possible?
>
> This is the way I have my K3/P3 combination connected to the 1k-FA, and
> it
> works well.
>
> Stewart G3RXQ
> On Mon, 28 Nov 2011 07:00:26 -0600, Phil & Debbie Salas wrote:
> > The SPE Expert has the standard BCD band data interface as well. You
> can
> > just feed the band data outputs of the K3 to the SPE Expert and not
> even use
> > the RS232 interface.
> >
> > Phil - AD5X
> >
> > "Good morning all. I have seen some postings of EXPERT 1k users here
> on the
> > reflector, I need
> > your help. A friend has a K3 and a P3. Now he wants to connect his
> EXPERT
> > PA to this
> > combo. The problem: The K3 RS232 is occupied by the cable to P3, both
> P3
> > RS232 are occupied by Cables to k3 and PC. Because he wants to use
> the
> > Expert with different Antennas on different bands, he wants the K3 to
> tell
> > the EXPERT on which band it should work. But how? I personally have a
> > K3/P3/KPA500, so I can´t try to find a solution. Peter, DL2FI"
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home:
http://mailman.qth.net/mailman/listinfo/elecraft> > Help:
http://mailman.qth.net/mmfaq.htm> > Post: mailto:
[hidden email]
> >
> > This list hosted by:
http://www.qsl.net> > Please help support this email list:
http://www.qsl.net/donate.html>
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html