Re: P3/K3

Posted by Alan Bloom on Dec 08, 2011; 7:02pm
URL: http://elecraft.85.s1.nabble.com/P3-K3-tp7075106p7075468.html

On Thu, 2011-12-08 at 14:27 -0300, Mike Harris wrote:
> G'day,
>
> Anyone using an USB>RS232 interface between the PC an P3/K3 combo.  I'm
> particularly thinking something like the microHAM Digi Keyer.
>
> I assume the P3 doesn't need any of the RS232 signals other than TX and
> RX and can therefore accept the RS232 out of the Digi Keyer which would
> ordinarily go to the K3 RS232 port.

Correct.

> PTT and keying would be taken care of by the Digi Keyer so the RS232 RTS
> and DTS wouldn't be required.

The RTS, CTS and DTR signals are connected directly between the "PC" and
"XCVR" RS-232 connectors on the P3.  There is no connection to internal
circuitry.  If the PC software is using these lines for CW keying or
other purposes, it should work the same with or without the P3.

Alan N1AL

> I have a Digi Keyer and it works perfectly well with the K3 and my
> software; Logger32 and SD (contest) both of which generate perfectly
> acceptable software CW for me.  At present I'm running the the K3
> without any external interface into the PC via RS232 and the PC internal
> sound card.  Not quite so easy to play the sound card levels but workable.
>
> Regards,
>
> Mike VP8NO
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html