Re: KPA500 Heat Expansion Pop
Posted by
Robert Dorchuck W6VY on
Dec 11, 2011; 3:19pm
URL: http://elecraft.85.s1.nabble.com/KPA500-Heat-Expansion-Pop-tp7082519p7083757.html
Message: 40
Date: Sat, 10 Dec 2011 19:35:16 -0500
From: Don Wilhelm <
[hidden email]>
Subject: Re: [Elecraft] KPA500 Heat Expansion Pop
To:
[hidden email]
Message-ID: <
[hidden email]>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I would be concerned that going from 5/16 inch to 3/16 inch may be too
much of a difference to assure that the screws have enough thread
engagement. I would think going to 1/4 inch would be a better choice.
-------------------------------
I agree Don. But I was told by Gary at Elecraft to use the 3/16" screws. There were no 1/4" screws in my kit.
Bob W6VY
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html