Posted by
Nr4c on
Dec 14, 2011; 6:37pm
URL: http://elecraft.85.s1.nabble.com/KPA500-Heat-Expansion-Pop-tp7082519p7094547.html
Didn't realize the screws were "flat-heads". Sorry.
...bill nr4c
Sent from my Verizon Wireless 4GLTE Phone
-----Original message-----
From: iain macdonnell - N6ML <
[hidden email]>
To: "
[hidden email]" <
[hidden email]>
Cc: KD2A <
[hidden email]>,
[hidden email]
Sent: Tue, Dec 13, 2011 16:59:34 GMT+00:00
Subject: Re: [Elecraft] KPA500 Heat Expansion Pop
I don't think there are any 1/4 4-40 flat head screws in the K3
(either) ... ? There are 1/4 pan heads, but flat heads are 3/16 or
5/16 (IIRC)
~iain / N6ML
On Mon, Dec 12, 2011 at 9:04 PM,
[hidden email] <
[hidden email]>
wrote:
> How about "spares" from the K3 kit?
>
> ...bc. nr4c
>
> Sent from my Verizon Wireless 4GLTE Phone
>
> -----Original message-----
> From: KD2A <
[hidden email]>
> To:
[hidden email]
> Sent: Tue, Dec 13, 2011 03:27:34 GMT+00:00
> Subject: Re: [Elecraft] KPA500 Heat Expansion Pop
>
> My amp has been "click" free for four days now. To clarify, page 22
Fig.27,
> is the area I'm referring to. Change the five 5/16" screws to 3/16" when
> mounting the Z-bracket on the PA/LPF module. I also would have preferred
to
> use 1/4" screws but none come with the kit.
>
> --
> View this message in context:
>
http://elecraft.365791.n2.nabble.com/KPA500-Heat-Expansion-Pop-tp7082519p7088
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html