Posted by
Jack Brindle-2 on
Dec 15, 2011; 3:54am
URL: http://elecraft.85.s1.nabble.com/KPA500-and-XG3-Mac-and-Unix-Utilities-now-available-tp6849464p7096049.html
Just to make sure, you are using a separate port on the Keyspan device to communicate with the KPA, right? As a reminder to all, the KPA500 does not have serial port pass-through capabilities. You must use separate ports to communicate with the K3 and KPA500.
I use a very similar setup to communicate with my KPA500 and K3/P3 system from my Mac mini running Lion. The difference is that I use an FTDI 4-port adapter. It works very well.
Make sure you have the latest drivers from Keyspan/Tripp Lite drivers for the 4-port device. Unfortunately the Keyspan driver is still at the beta stage. You might contact them about the problem.
Jack Brindle, W6FB
On Dec 14, 2011, at 7:26 PM, w3bg wrote:
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html