http://elecraft.85.s1.nabble.com/How-is-handkey-plug-wired-for-KX-1-tp7108331p7110783.html
available, so you must use the paddle to input the CW messages. The K3
and KX3 will have added functionality from K3 (and KX3) Utility.
> Wayne,
>
> As an option, is it possible to store a "recorded" CW message via download from the KX3 utility program? Not as flexible as the portable use of a keyer but it should be able to be an alternative.
>
> 73, phil, K7PEH
>
>
> On Dec 19, 2011, at 9:09 PM, Wayne Burdick wrote:
>
>> k7nhb wrote:
>>
>>> I see at the top of page 66 it says, "CW messages can only be recorded
>>> using the KX1's internal Keyer." That apparently implies you must
>>> use a
>>> paddle to record. You cannot use a straight key....
>>>
>>> If someone knows for sure, please confirm that you cannot record
>>> messages to
>>> the KX1's memory with a straight key.
>> Hi Paul,
>>
>> That is correct.
>>
>> Decoding from Morse sent via the internal keyer was pretty easy, since
>> the KX1 itself determines the length of dots/dashes/spaces in that
>> case. We would like to have included message entry via a hand key or
>> external keyer, but we sorta used up all the code space ;)
>>
>> 73,
>> Wayne
>> N6KR
>>
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home:
http://mailman.qth.net/mailman/listinfo/elecraft>> Help:
http://mailman.qth.net/mmfaq.htm>> Post: mailto:
[hidden email]
>>
>> This list hosted by:
http://www.qsl.net>> Please help support this email list:
http://www.qsl.net/donate.html> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>