Login  Register

Re: KPA500 was working now it's not

Posted by Bob Wolbert, K6XX on Dec 28, 2011; 3:56am
URL: http://elecraft.85.s1.nabble.com/KPA500-was-working-now-it-s-not-tp7131684p7133206.html

You aren't getting the KEY IN signal so the amp thinks it is in receive
mode. Is the asterisk in the display?

73 de Bob, K6XX
 

> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of
> [hidden email]
> Sent: Tuesday, December 27, 2011 7:34 PM
> To: Elecraft List
> Subject: [Elecraft] KPA500 was working now it's not
>
>
>
>
> Powered up my KPA500 today for the first time today and it
> was working ok with my Flex-5000. Got 500 watts out on 40 to
> a dummy load and everything seemed ok. Powered the rig and
> amp off then on and all of a sudden get only 35 watts out for
> 35 in. Does not matter what band I Put my rig on as I only
> get out what I put in. Don't see any errors and the amp is in
> OPER. There are no faults BTW.
>
> Anyone have any thoughts as to why I no longer get any output
> from the amp?
>
> Zack
>
> N8FNR
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html