Another KPA500 question

Posted by bob finger on Dec 29, 2011; 2:07am
URL: http://elecraft.85.s1.nabble.com/Another-KPA500-question-tp7134629.html

I too am considering purchase, but before I do an interface question or two.

I will NOT be giving up the big amp...assuming I hook it up to Antenna 2
on the K3 and use the PTT line can I
1. put the kpa500 on ant 1 and use the accy interface, and keep the big
amp on ant 2 with the ptt line?  I assume yes....
2. If the kpa500 is in standby mode will the accy connection to the k3
be transparant ie  can I set power out on ant 2 independently and key
the big amp via the ptt line as usual?

The point being I don't want to have to physically reconfigure the
cabling etc. when I want to use the big amp.....and no way  will I daisy
chain the amps.   Thanks in advance.  73 bob de w9ge
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html