Re: another kpa500 question

Posted by bob finger on Dec 29, 2011; 5:52pm
URL: http://elecraft.85.s1.nabble.com/Another-KPA500-question-tp7134629p7136322.html

K9YC said in part:  "

"So -- all I have to do to switch between the two amps is to choose Ant1 or Ant 2, switch the antennas between the two amps, and reset the drive level"

Thanks Jim, that is exactly the response I was hoping for.  My big amp is now a TT Titan III. I retired a pair of 425's a few years ago.  My plan is to have dpdt relay on the output side of the amps, and switch the ptt lead open or thru on the Titan when it is off or in line.  Switching between the two will be a single external switch throw, a push of ant 1/2 button on the k3 and hitting the standby/operate switches on the amplifiers. No excuse now not to order a KPA500.  I'm looking forward to it.  HNY  73 bob de w9ge

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html