http://elecraft.85.s1.nabble.com/K3-K3-and-Ameritron-AL-811H-Amplifier-tp7172645p7173475.html
Do you have coax from the K3 to the amp? Is the K3 on the correct RF out connector
> All,
>
> I recently acquired a used Ameritron AL-811H for use with my K3 (until I
> can save enough to get the KPA500). I seem to be having issue getting the
> amp to respond to key down on the rig. I have an RCA cable running from
> KEY OUT on the back of my K3 to the RELAY on the back of the amp. I have
> DIGOUT1 on the K3 set to ON. The amp is configured for, and plugged into,
> a 240V AC outlet. When I go key down, either in CW or SSB, I only get a
> plate current of about 120 mA and don't get any grid current. I suspect I
> have something misconfigured and the issue is operator error, but I'm at a
> bit of a loss as to where to look at this point. Can anyone offer any
> guidance?
>
> Thanks and 73,
>
> Ian Kahn, KM4IK
> Roswell, GA
>
[hidden email]
> K3 #231, P3 #688
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>