Re: What autotuner to use with KPA500?

Posted by Phil Salas on
URL: http://elecraft.85.s1.nabble.com/What-autotuner-to-use-with-KPA500-tp7218595p7220266.html

I've been using a MFJ-998 for about four years - first with an ALS600 and
now with the KPA500.  The MFJ-998 works very well.  It has an amp-disable
feature that opens the amp-key line when SWR goes above a pre-set level, or
when the tuner starts tuning.  I modified my MFJ-998 so that it disables the
KPA500 via AUX connector pin11, which is even faster than opening the
amp-disable line.  Info on the MFJ-998 mod is in the "Equipment
Modifications" section of my website at www.ad5x.com.  I also have a review
of the MFJ-998 on my webiste.

I have my K3 set for 15 watts TUNE output, and I leave the MFJ-998 in the
full-auto mode.  So when I change bands or antennas I push TUNE on the K3.
If the SWR is 2:1 or greater the MFJ-998 disables the amp and tunes, then
re-enables the amp.  As most of my normal frequencies are already stored in
memory, the MFJ-998 usually clicks once and it is tuned.  And, of course, if
I forget to tune first or pick the wrong antenna, the MFJ-998 disables the
KPA500 as soon as I transmit.

I am looking forward to the KAT500 as I assume it will automatically pick a
previous memorized tuning solution whne you change bands or frequencies on
the K3 without having to transmit first.  But in the interim, the MFJ-998 is
a nice tuner.

Phil  - AD5X

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html