Re: SOS from 5v7v

Posted by Vic Rosenthal on
URL: http://elecraft.85.s1.nabble.com/SOS-from-5v7v-tp7259258p7259329.html

Regarding the K3, check that the KPA3 module is seated properly on its connectors. Maybe
it was jarred loose.

On 2/6/2012 9:13 AM, Franco Prete wrote:

> Hy boys l'am actually in Africa - TOGO - trying to put on air 5V7V K3 and also kpa500
> where broken during flight.Incredible.
>
> Now kpa500 sign on display 270volt error when switched from stby to oper. then bip bip
> bip and no more able to switch off.
>
> K3 works only low power - no hy power and when change from low to hi pwr reception
> decrease of 3/4 of s.meter - on hy power po power out - zero.
>
> Antenna are ready me too but equipment???All radio where working well before start from
> home and well - very well packaged for flight.
>
> Any idea??
>
> Franco i1fqh also 5v7dx - 5v7v etcc.....

--
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html