Re: Need plans for building small baluns for using balanced feedline with a K1

Posted by Nr4c on Feb 23, 2012; 2:06pm
URL: http://elecraft.85.s1.nabble.com/Need-plans-for-building-small-baluns-for-using-balanced-feedline-with-a-K1-tp7310827p7311922.html

I recommend the Elecraft site for manual for the BL1 or BL2 BALUNs they
sell.  Or just buy one of them.  The BL2 is switchable from 1:1 to 4:1
and is small, and very well designed.  I tested mine on a high end
vector analyzer and it is flat from 160-6meters and beyond.  Handles my
K3/100 and Kenwood TS-520S very well.

...bc


On Wed, 22 Feb 2012 23:27:26 -0500, George Averill wrote:

> I know I should be able to find this information someplace, but so
> far I haven't come up with it, and I am sure someone has already
> designed these.  I would appreciate it if you would send me the
> plans.
> Please send to my email [hidden email] so I will be sure to get it.
> I am getting way to many emails at present, and some gets lost in the
> shuffle.
>
> 72, George
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html