Re: KPA500 & RemoteRig

Posted by Jack Brindle-2 on Mar 14, 2012; 7:24pm
URL: http://elecraft.85.s1.nabble.com/KPA500-RemoteRig-tp7372486p7373049.html

No. The K3 cannot control the KPA, so this is not feasible. If you  
want to use the KPA with remoterig, you will need to set up a separate  
serial communications channel between the remote computer and the KPA.

Note that while the KPA sends the K3 information, the K3 does not talk  
back to the KPA. The KPA does listen to the K3's band pins, but this  
does not provide reliable information to allow communications.

Jack B, W6FB


On Mar 14, 2012, at 10:04 AM, David F. Reed wrote:

> Is there a command (or maybe will be made available) that can act as  
> the
> OPER/STBY switch on the KPA500 via the K3, to make that work using
> RemoteRig?
>
> Perhaps I missed something?
>
> Thanks & 73 de Dave, W5SV
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html