the connector. That is, strip a short section of cable, find the right
> Hi Brandon: Since the KPA500-K3 Aux Cable that is currently supplied with
> the KPA-500 has molded connectors, its difficult (or impossible) to modify
> to add the wire as described by Bob. Will Elecraft, in the future, make
> available an alternate Aux cable with this additional wire?
>
> 73, Doug Joyce VE3MV
>
> ----- Original Message -----
> From: "Brandon Hansen"<
[hidden email]>
> To: "David F. Reed"<
[hidden email]>
> Cc:<
[hidden email]>
> Sent: Wednesday, March 14, 2012 3:15 PM
> Subject: Re: [Elecraft] KPA500& RemoteRig
>
>
>> Hello Dave,
>>
>> You'll have to wire some pins up manually and create a macro to
>> control the KPA500. I have attached a document by Bob Wolbert explaining
>> this setup in more detail. Let me know how it goes for you.
>>
>> 73 for now
>> Brandon Hansen, KG6YPI
>> K3-Remote Support
>> Elecraft
>>
>> On 3/14/2012 10:04 AM, David F. Reed wrote:
>>> Is there a command (or maybe will be made available) that can act as the
>>> OPER/STBY switch on the KPA500 via the K3, to make that work using
>>> RemoteRig?
>>>
>>> Perhaps I missed something?
>>>
>>> Thanks& 73 de Dave, W5SV
>>> ______________________________________________________________
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
>