KPA500 hi swr error
Posted by
K5SM on
Mar 16, 2012; 11:41pm
URL: http://elecraft.85.s1.nabble.com/KPA500-hi-swr-error-tp7380559.html
I put up a 40 meter vertical with elevated ground plane today. The swr
is 1:1 at the bottom of the band (where I operate). For some reason,
after sending a few characters, the KPA 500 suddenly shows high swr and
faults. After resetting, the cycle begins again. I have an analog
swr/watt meter following the KPA500, and it does not show the swr
change. It has also done this on my 80 meter antenna. What is going on?
Bob
--
Robert Redmon K5SM
AMA 58073
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html