Posted by
Donehrlich@q.com on
Mar 17, 2012; 4:18pm
URL: http://elecraft.85.s1.nabble.com/K3-Break-in-with-an-amp-question-tp7381550p7381938.html
The powercube is definitely a ham amplifier. I know of at least one
owner who is very happy with the one he has but, then, he only operates SSB.
Most amps that use relay T/R switching (and that is *most* amps) do the
clickety-clack thing. I know of failed relays that could not take the
abuse. Your solution of using semi-breakin with an appropriate delay is
the only way to avoid this problem. With my new KPA500 I no longer have
that problem but, with my previous Tokyo HyPower amp, I used a homebrew
PIN Diode switching system to do all of my T/R antenna switching with
all solid state circuitry but that is not a trivial exercise.
Don K7FJ
On 3/17/2012 4:49 AM,
[hidden email] wrote:
> I am attempting to slowly learn to work with CW but at first it is with
> a computer program but I am not sure if that is relevant.
>
> I understand the reason for break in as it allows for RX listening
> between your TX in case someone it trying to contact your.
>
> The issue is that when using VOX and with semi or full breakin when
> using my amp the relays in the amp are clicking and clacking like crazy
> which to me seems very abusive to the amp. My solution has been to go
> to semi break in and then set a long delay time so the amp and K3 stay
> keyed.
>
> The amp is an SGC powercube and I do have it wired to the K3 so it gets
> a PTT signal.
>
> Am I doing the right thing with the delay or are there other ways to
> stop the amp from going nuts or is this just the nature of the beast.
>
>
> ~73
> Don
> KD8NNU
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html