Re: [K3] K3 break in with amp question

Posted by KD8NNU on Mar 17, 2012; 11:52pm
URL: http://elecraft.85.s1.nabble.com/K3-K3-break-in-with-amp-question-tp7382365p7382592.html

Everyone who replied to my post thank you very much.

It confirmed my reading of the manual and what semi breakin vs full
break in.   I now know what I am doing is correct as I do the the proper
cables for PTT to trigger the amp.   I have found a good semi breakin
delay and everything works as it should

Thanks again for the replies.   I was basically concerned that I did not
properly understand what I had read as I have made these mistakes in the
past.

In regards to the amp it is not a CB amp but a very well constructed HAM
amp and it is highly sought after in the used market for mobile use.
My origional plans were to use it as a mobile but I tried it out in my
shack first and it never made it to the jeep.  Mine does have the
modification to turn 10 meters on.

Cheers
Don

~73
Don
KD8NNU


On Sat, Mar 17, 2012 at 7:30 PM, WILLIS COOKE wrote:

> As I stated, my opinion is based strictly on the SGC web site, the
> information they choose to display and the terminology they choose to
> use.  I have not used or known anyone who used their products. but I
> would not touch one with a 3 meter pole.
>  
> Willis 'Cookie' Cooke K5EWJ & Trustee N5BPS, USS Cavalla, USS Stewart
>
>
> ________________________________
>  From: Mike Rodgers <[hidden email]>
> To: "[hidden email]" <[hidden email]> Sent:
> Saturday, March 17, 2012 3:51 PM
> Subject: [Elecraft] [K3] K3 break in with amp question
>  I'm sure it was not realized but the company called SGC makes many
> ham radio products. They are most known for their smart tuners. Also
> dsp speakers and powercube amps.
> Although there is no mention of FCC certification, they do mention
> modification may cause decertification. The USA model was shipped for
> all hf bands and required a mod for 10m like all others at the time.
> There are filters for all hf bands.
> They have advertised in qst full page ads for the amp in the past.
> I know this was a honest omission.
> I'd just hate to see this cb thing get out of hand.
> 73
> Mike R
>
> Sent from my spy ring
>
> Amateur/Ham Radio KE5GBC
> HF & Echolink mobile
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html