KPA500 Assembly Question

Posted by Dave Anderson, K4SV on Mar 20, 2012; 2:16am
URL: http://elecraft.85.s1.nabble.com/KPA500-Assembly-Question-tp7387836.html

Hi All,

Thought I would bounce this question off those who have assembled the KPA500.  

I am building Serial #439

I am at page 22 where it says to install 5 - 5/16" Black Flat Head screws in the plate attached to the PA.  I can not find any 5/16" screws in the hardware bag.  I found two in the spares bag and two installed in the AC fuse block.  Checked everything else.  Stephanie either missed it totally or the manual is incorrect.  Up to this point she has been spot on.

Could this be an error where they really meant to use 3/16"?  I tried 3/16" and they have 4 to 5 threads into the heatsink.

Suggestions?

Thanks in advance,

Dave Anderson, K4SV
Tryon, NC
 828 777-5088

www.K4SV.com  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html