I dunno. Beats me. You sure it doesn't move when you spin the VFO B
> -------- Original Message --------
> Subject: [Elecraft] P3 Basics
> From: Pete Meier <
[hidden email]>
> Date: Tue, March 20, 2012 8:39 am
> To:
[hidden email]
>
>
> Ok folks,
>
> I'll try this question again. On the P3 display there is a purple line that move out or in when you set the SPAN width. This is NOT the VFO A or B marker!
> I would like to understand what it signifies and if there is any control over it's position other than the SPAN setting and why.
> I find on some bands it up the scale, like on 20 meters CW, with Span set at 40 it's way up at 14.186.00 when I am at 14.010.00
> But when I switch to 30 meters CW Span at 40 also its at 10.115.45 while on 40M CW at 40 Span it's at 7.008.00
> So it confounds me what it signifies as it varies so much between bands at the same settings.
>
> Please politely enlighten me.
>
> Thanks,
>
> Pete WK8S
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html