Posted by
vk4tux on
URL: http://elecraft.85.s1.nabble.com/P3-SVGA-tp7393011p7396266.html
To: Elecraft Mailing List <
[hidden email]>
Message-ID: <2012321125747.065893@home-5700c25bca>
Content-Type: text/plain; charset="iso-8859-1"
"UPS showed up 20 minutes ago with my new P3SVGA board. Took about 15
minutes to install it. The power supply I use for the station has some AUX
terminals on the back that are good for 5 amps so it was really easy to hook
the new power cord supplied with the SVGA unit to those terminals. Now,
when I switch the power supply on, the P3 comes up and waits for the K3 to
be powered up. A little clunky, but once the mod is available to make the
K3 supply a bit more current, I'll do that and then everything will be back
to normal again."
If you are like a few of us that run the K3 at ~15v, you will find no mod is
necessary, and the P3SVGA runs happy all day
Long from the K3 with no mod. That is my experience.
My k3 runs at a custom HD cable/PS setup, K3 display shows 15.2v unkeyed and
14.8v keyed @ 110w. IM3 -36dB
Adrian ... vk4tux
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html