Re: anyone running HRD with Signalink & K3 help

Posted by Ian Kahn, KM4IK on Mar 25, 2012; 4:46am
URL: http://elecraft.85.s1.nabble.com/anyone-running-HRD-with-Signalink-K3-help-tp7402171p7402516.html

Gerald,

First thing I'd check is in the HRD soundcard properties.  Make sure it
is set for the SignaLink, not the computer's sound card.  It should read
"USB Audio Device", or something similar and equally generic.  Also, do
you have the correct cables connected to the K3?  The radio end should
have three plugs, one each for line in, line out, and keying.  Make sure
they are correctly connected to the K3, and that the K3 is set for MIC +
Line In in the microphone settings in the MENU.

Hope this helps.

--Ian

Ian Kahn, KM4IK
Roswell, GA
[hidden email]
K3 #281, P3 #688


On 3/24/2012 7:10 PM, KC6CNN wrote:

> I installed the HRD 5.11a build with a signalink and keep getting a
> microphone failed error.
> It says microphone failed the 48hz and 8hz I/O test
>
> Can seem to change the setting right. also the ptt is set for roc even thou
> I tell it to let the signalink control it. defaults back to roc.
>
> Any help would be greatful.
>
> Thanks
> Gerald - KC6CNN
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/anyone-running-HRD-with-Signalink-K3-help-tp7402171p7402171.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html