Re: KPA-500 AMP Question
Posted by
Don Wilhelm-4 on
Mar 27, 2012; 7:45pm
URL: http://elecraft.85.s1.nabble.com/KPA-500-AMP-Question-tp7410885p7411161.html
I think one important matter is being overlooked - when properly
installed, the transformer will not move. The fact that the screwhead
is touching the plastic wrap on the transformer is likely OK. If things
do not move about, that spacing should stay the same.
73,
Don W3FPR
On 3/27/2012 3:25 PM, Scott Manthe wrote:
> Hi Dave,
> A quick Google search indicates that the KPA500 has been used on at
> least 5 DXpeditions that I've found: T2T, HK0NA, 5V7V, ZD8D, and J68/W0MU.
>
> Since the amp was designed specifically for that purpose in my, I'd be
> surprised if the design team let a potential issue like that survive the
> process. You might check the assembly manual again to see if it's
> possible you missed something.
>
> Regards,
> Scott, N9AA
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html