Posted by
Bill Johnson-9 on
Aug 22, 2008; 12:32am
URL: http://elecraft.85.s1.nabble.com/noise-blanker-tp735319p741761.html
I have found that if there are weeds growing near any of the wires, the
noise will arc. I suggested to my neighbor that I could hear his fence and
what caused the issue. He took care of it... for awhile.... Maybe the old
pony will pass in the next couple of years and that will be the end of it.
I use the DSP with some limited effect because it creates more artifacts
than it cures with the fence noise. Oh, my TS-2000 has the same issue...
worse, actually.
I like solution 1! Just if I could pull it off without the horse noticing
me!
72,
Bill
K9YEQ
K2 #35, K2 # 5279, KX1 #35, Mini Modules, etc.
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of Tom Childers, N5GE
Sent: Thursday, August 21, 2008 3:42 PM
To: Petr Ourednik
Cc:
[hidden email]
Subject: Re: [Elecraft] [K3] noise blanker
On Wed, 20 Aug 2008 11:55:54 +0200, "Petr Ourednik" <
[hidden email]>
wrote:
>Hi,
>
>
>My antennas are really close to electric fence (just few metres)
>so the pulses on all bands with K3 are over S9+20dB !
Ouch!
Solution 1:
Take one pickup truck and tie the back bumper to the fence with an insulated
rope. Jump in the cab and pull the fence as far as you can away from your
QTH
and destroy the charger.
Solution 2.
Help your neighbor find a fence charger that is not so noisy.
Solution 3.
Move to another location.
All the above is tongue in cheek.
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com