Re: FW: KAT500 vs KAT3 Matching Range

Posted by Matt Murphy on
URL: http://elecraft.85.s1.nabble.com/KAT500-vs-KAT3-Matching-Range-tp7416153p7419391.html

Would it be fair to assume that if the KAT3 matches a load sufficiently to
allow the transceiver to put out 100W that the KAT500 would match the same
load safely for 500W?

Matt NQ6N

On Thu, Mar 29, 2012 at 12:57 PM, Andy Wood <[hidden email]> wrote:

> Hi Dick,
>
> Thanks for the confirmation - that is what I hoped the answer would be.
> Thanks also to all others  that have responded, both on and off list.
>
> Andy  VK4KY
>
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/KAT500-vs-KAT3-Matching-Range-tp7416153p7419080.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html