first post test and kx1 power issues
Posted by
IanMW on
Apr 15, 2012; 11:12am
URL: http://elecraft.85.s1.nabble.com/first-post-test-and-kx1-power-issues-tp7467649.html
Hi folks,
I've just finished building my base kx1 without options, planning to use it as my prime SOTA rig, (along with the rockmite 40 & SW+20 I have already used).
Construction and stage checks went fine, it emits rf and sounds fine on my big rig.
I've checked the output into a dummy load and homebrew rf probe which is "quite" accurate. To cut to the chase, I get more power on 20 meters than 40 meters, at 14 volts I have 2.9w and 2.6w respectively. Now this is fine but I read that 20 is normally lower than 40 for optimal clean signals. I've checked all my work, windings are correct and bunched up to 70% of diameter on L2.
Is this a problem or just component variability? I've still to see what I get at 9 volts, although it'll run from an 11.1 volt 3c lipo when SOTA.
I have one qso in the bag on 20 meters, 559 from France.
The receiver is very fb, and I love the qsk.
Just to recap, happy with the power out (I've worked N4EX from here in Scotland using 1.5 watts), just unsure about emisions.
73,
Ian, MM0GYX
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html