Re: k1 speaker output wimpy

Posted by Don Wilhelm-4 on
URL: http://elecraft.85.s1.nabble.com/k1-speaker-output-wimpy-tp7481213p7481551.html

I would not call it "wimpy", but that smaller speaker used with the
battery option is a bit on the "tinny" side.
Refer to the KBT1 instruction manual and check to be sure the speaker
has the little foam ring and that it is inserted properly.

Another point with that internal battery option - I have seen some who
have shorted out the batteries by placing the battery holder in 90
degrees from the way it should be - the length of the batteries goes
from the front to the back *not* side to side.

73,
Don W3FPR

On 4/19/2012 12:02 PM, af6ni wrote:
> I just purchased this K1 used. I have had others in the past, but this is the
> first with the battery option. It seems as though the audio from the speaker
> is no where near what I remember on other k1's. Is this common with the
> speaker on the case for the battery option?
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html