Login  Register

Re: K1 KBAT1 bracket

Posted by Don Wilhelm-4 on Apr 21, 2012; 9:08pm
URL: http://elecraft.85.s1.nabble.com/K1-KBAT1-bracket-tp7487953p7487975.html

Byron,

I don't know just how much your bracket is extending above the side
panel, but there is a slight bit of contact intended to keep the bracket
from rattling around.
Your solution is probably correct, but just cut a little at a time so
you don't go too far.

73,
Don W3FPR

On 4/21/2012 4:43 PM, Byron Servies wrote:

> Hi there!
>
> I have finally decided to give the KBAT1 I've had sitting here for a
> while a try.  I've relocated my K6XX CW tuning indicator so that the
> battery bracket will fit, but I'm having trouble with the bracket +
> new top cover combination.
>
> The bracket is fully down on the stop, but on the battery/switch side
> the top cover will not sit flush.  It seems the groove for the bracket
> is not deep enough.
>
> Before I break out the dremel or a file and solve the problem, has
> anyone else seen this issue?  And what did you do about it?
>
> 73, Byron N6NUL
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html