Posted by
Edward R Cole on
May 01, 2012; 3:28pm
URL: http://elecraft.85.s1.nabble.com/Fixed-audio-output-missing-on-the-KX3-tp7515423p7517185.html
Just wondering "out loud" on this. Could firmware be added for the
KX3 under the data modes to set the audio gain to a fixed
value? This would provide the desired levelized audio output with no
hardware upgrades or addition.
Connecting to the baseband audio has already been addressed in the
current design.
This does not address transmit audio issues but there seems a couple
alternatives for that (mic input or GPIO and only requires an
external pot for setting level). I have already offered to come up
with an I/F "critter" for those that want to use computer-based
soundcard sw (but told to hold off I bit until more have the radio).
73, Ed - KL7UW, WD2XSH/45
======================================
BP40IQ 500 KHz - 10-GHz www.kl7uw.com
EME: 50-1.1kw?, 144-1.4kw, 432-QRT, 1296-?, 3400-?
DUBUS Magazine USA Rep
[hidden email]
"Kits made by KL7UW"
http://www.kl7uw.com/kits.htm======================================
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html