Re: K1 ?

Posted by Guy, K2AV on May 28, 2012; 2:42pm
URL: http://elecraft.85.s1.nabble.com/K1-tp7556672p7556678.html

Wouldn't that display be relative to the band edge, not absolute?  Only
thing changed in the K1 between the two modes of thirty meters is a crystal
and a capacitor.  Everything the rest of the radio has to do is in
reference to a band edge, which is against a xx.000 band edge or  either
10.000 or 10.100  for 30m.  With the 80 kHz the band edge is 10.1.

73, Guy.

On Mon, May 28, 2012 at 9:23 AM, Dale Putnam <[hidden email]> wrote:

>
> Ok, I ran outta ideas, so I am referring this to the group, of super
> experts here.  A K1, on 30m, narrow vfo, (80mhz) cal op, and b2 chosen to
> be 10.1 however, when selecting the band, the display show 10, then 018,
> then 18.1. That leads one to think it is working on 10.018.1 yet it is
> really on 10.118.1 The tx and rx are correct. It is the display flash of
> 10, then 018 and specifically the 0 that is at issue. Any thoughts? Thank
> you very much and have a Safe Memorial Day.
>
> --...   ...--
> Dale - WC7S in Wy
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html