Re: K1 ?
Posted by
Mike Morrow-3 on
May 28, 2012; 3:10pm
URL: http://elecraft.85.s1.nabble.com/K1-tp7556672p7556682.html
> A K1, on 30m, narrow vfo, (80mhz) cal op, and b2 chosen to
> be 10.1 however, when selecting the band, the display show
> 10, then 018, then 18.1. That leads one to think it is
> working on 10.018.1 yet it is really on 10.118.1 The tx and
> rx are correct.
You must select the B2 function in the menu. What you see now
apparently is 10.0, and you want it to be 10.1. To make that
swap, while 10.0 is shown, PRESS AND HOLD the BAND/DISPLAY button
until you see 10.0 change to 10.1. Exit the menu to get back to
the VFO indication and you're done.
This is in K1 manual on page 39 left side middle page. It is
also on the Quick Reference Guide on the last page of the manual.
73,
Mike / KK5F
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html