Re: K3 KPA500 Oper/Stby Alert
Posted by
George Danner on
May 31, 2012; 10:29pm
URL: http://elecraft.85.s1.nabble.com/K3-KPA500-Oper-Stby-Alert-tp7556849p7556868.html
If we are voting, then I vote to leave it as is.
I do not have a problem with the wrong power selection. I turn on the K3
before turning on the KPA500 & turn off the KPA500 last during power down.
I do like verifying the KPA500 status from the K3.
I have not used the K3 tune function after installing the KPA500.
If there is a FW issue when going to/from Tune mode, then document the issue
as completely as possible with Elecraft service. They have fixed such issues
in the past; usually very quickly.
George
AI4VZ
--------------------------------------------------
From: "Geoffrey Downs" <
[hidden email]>
> The change gets my vote. Good idea.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html