Re: KXV3 Question
Posted by
Dave-3 on
Jun 07, 2012; 4:38pm
URL: http://elecraft.85.s1.nabble.com/FS-XV50-and-XV144-tp7557246p7557253.html
No you dont have to for "normal" transverter operation.
When I set the transverter power setting in the menu (config:XVn power) to
low power (<=1.5mW) the xverter ports are automatically activated
Dave
ww2r
Date: Thu, 7 Jun 2012 11:50:18 -0400
From: "John Santillo" <
[hidden email]>
Subject: [Elecraft] KXV3 Question
To: "'Elecraft Reflector'" <
[hidden email]>
Message-ID: <
[hidden email]>
Content-Type: text/plain; charset="us-ascii"
Hello all,
For the KXV3 transverter ports to be operational, should the KXV command be
set to "test" instead of normal? The BNC I/O ports don't seem to work
unless it's put into test mode.
Comments appreciated.
73,
John
N2HMM
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html