Posted by
Edward R Cole on
Jun 08, 2012; 7:39am
URL: http://elecraft.85.s1.nabble.com/FS-XV50-and-XV144-tp7557246p7557300.html
John, N2HMM, did you set up the CONFIG settings for transverters:
XV1 = ON
XV1 RF = frequency band of the transverter (e.g. 144)
XV1 IF = IF frequency the K3 will operate (e.g. 28)
XV1 PWR = L 1.50 for 1.5mw max
XV1 ADR = trn x, where x = 1 thru 9
each transverter gets a different XVx setting (i.e XV1 for 144, XV2
for 222, XV3 for 432 etc up to XV9
If these settings have not been done the KXV3 will not operate.
73, Ed - KL7UW, WD2XSH/45
======================================
BP40IQ 500 KHz - 10-GHz www.kl7uw.com
EME: 50-1.1kw?, 144-1.4kw, 432-QRT, 1296-?, 3400-?
DUBUS Magazine USA Rep
[hidden email]
"Kits made by KL7UW"
http://www.kl7uw.com/kits.htm======================================
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html