K1 no power out B2
Posted by AF6NI on Jun 09, 2012; 7:05pm
URL: http://elecraft.85.s1.nabble.com/K1-no-power-out-B2-tp7557347.html
I just completed assembling a K1. It works fine on receive and transmits properly on B1 but not on B2.
I have two 2 band filter boards, a 40/20 that I've had for a while and a 30/17 that I just built. Both work the same in the K1. I have full power on B1, but nothing on B2. The display shows 0.1 watts but my Elecraft W1 wattmeter shows no output. As I said above, receive seems OK on both B1 and B2.
Any suggestions gratefully accepted!
Thanks and 73.
Joe