KX3 and KPA500
Posted by
vk4tux on
Jun 10, 2012; 12:02pm
URL: http://elecraft.85.s1.nabble.com/KX3-and-KPA500-tp7557410.html
ACC2 IO setting > LO=PTT (input; apply 0 V or ground to
activate PTT)
> I can't figure out how to set the ACC2IO on the KX3 so that it will key
the KPA500 properly. I currently have the >ACC2IO in the off position. When
I connect the cable between the ACC2IO and the PA Key on the back of the
KPA500 it puts >the KPA500 in a transmit mode. I have to manually put the
KPA500 in standby to receive and then Operate to transmit. I >have tried a
number of different settings on the KX3 and KPA500 with no success. What am
I doing wrong? (incidentally >the KX3 will drive the KPA500 to almost 200
watts output).
>Dave WA6DKN
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html