Re: KX3 and KPA500
Posted by
Irwin KD3TB on
Jun 10, 2012; 2:33pm
URL: http://elecraft.85.s1.nabble.com/KX3-and-KPA500-tp7557410p7557415.html
Please share your solution as I plan on powering the KPA500 with a KX3 too
Thanks, KD3TB
On Sunday, June 10, 2012, Adrian wrote:
> ACC2 IO setting > LO=PTT (input; apply 0 V or ground to
>
> activate PTT)
>
>
>
> > I can't figure out how to set the ACC2IO on the KX3 so that it will key
> the KPA500 properly. I currently have the >ACC2IO in the off position. When
> I connect the cable between the ACC2IO and the PA Key on the back of the
> KPA500 it puts >the KPA500 in a transmit mode. I have to manually put the
> KPA500 in standby to receive and then Operate to transmit. I >have tried a
> number of different settings on the KX3 and KPA500 with no success. What
> am
> I doing wrong? (incidentally >the KX3 will drive the KPA500 to almost 200
> watts output).
>
>
>
> >Dave WA6DKN
>
>
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email] <javascript:;>
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
--
Irwin KD3TB
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html