Posted by Iain MacDonnell - N6ML-2 on Jun 11, 2012; 7:40pm URL: http://elecraft.85.s1.nabble.com/OT-6-meter-beacon-clicks-followup-tp7557465p7557503.html
I can't use the IF NB on 6m due to the nearby K6FRC beacon. It sounds
like key clicks over a large portion of the band, but it's really not.
The DSP NB does not suffer from this (obviously?)
73,
~iain / N6ML
On Mon, Jun 11, 2012 at 9:15 AM, Mike WA8BXN <[hidden email]> wrote:
> Hi Chuck,
>
> Have you tried turning the noise blanker OFF entirely? With some rigs I have
> found that the noise blanker can at times cause good signals to seem to have
> problems. You might also try using an attenuator to bring the beacon to say
> S9 and see if the clicks are still present. Doing this may not produce any
> interesting results, but perhaps it may.
>
> 73 - Mike WA8BXN
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] >
> This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html