Re: [K1] Tuning Jump Cause
Posted by
Mike Morrow-3 on
Jun 22, 2012; 6:14pm
URL: http://elecraft.85.s1.nabble.com/K1-Tuning-Jump-Cause-tp7557929p7557952.html
> My K1 has developed a glitch. Sometimes, while tuning, the
> displayed frequency will suddenly jump down about 10-15 kHz,
> then return to the correct frequency...
> The jump isn't caused by tapping the case, only moving the
> tuning knob.
Check the solder connections on both ends of the leads going
from the VFO pot to the front panel board. In particular,
check the solder connections of R19 that is soldered to two
terminals of the VFO pot. If you move these components
slightly while watching the LCD for erratic response you may
be able to find the exact problem source.
73,
Mike / KK5F
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html